Selection by device

SMALL CHESLE

Area use

Hand combs type RČ are used to capture floating and water-borne dirt. Installation in places where easy operation is expected, e.g. bypass channels of machine-wiped trolley combs.

MACHINE WIPE BELT COMBS

Area use

It is used to catch floating dirt and water-borne dirt. The basis of the combs is the frame in which the comb grid is placed. On the sides of the frame, guide rails are attached, in which the carriage with scraper rakes moves. The trolley also includes a rake lifting mechanism. This mechanism ensures all movements of the rake when wiping dirt from the comb grid, raising the rake when lowering the carriage to the lower position and extracting dirt from the comb grid. The combs do not consume electrical energy during their primary function, they are started only when it is necessary to clear sediment from the comb grid or the bottom of the channel (triggered by time or level).

MACHINE WASHED CHAIN ​​COMBS

Area use

Wiper chain combs, type SČR, are used to capture floating and water-borne dirt. They are suitable for use in waste water treatment plants, where they are installed in the entrance facility for mechanical pre-treatment, for water plants, pumping stations, irrigation, wood, paper and food industries, power plants and heating plants.

MACHINE WASHED CARRIAGE COMBS

Area use

Wiped trolley combs, type SČV, are used to catch floating and water-borne dirt. They are suitable for use in waste water treatment plants, where they are installed in the entrance facility for mechanical pre-treatment, for water plants, pumping stations, irrigation, wood, paper and food industries.

WWTP Z WASHING LINES

Area use

It is used to clean the rinsing waste water from car wash ramps. Cleaned water is freed of mechanical impurities and other loads, it can then be used again for washing vehicles, or it can be discharged into the sewer.

SEDIMENTATION TANK S ROPE DRIVE

Area use

Settling and settling tanks with rope drive type DN L, UN L are intended for sludge separation in wastewater treatment plants. The product is a sludge suspension, which goes to the next treatment unit for processing.

SEDIMENTATION TANK S CIRCUIT DRIVE

Area use

Settling and settling tanks with a traveling bridge are intended for the separation of sludge in wastewater treatment plants. The product is a sludge suspension, which goes to the next treatment unit for processing.

LONGITUDINAL FLOTATOR

Area use

The MAXIFLOT LC flotation device is used for cleaning waste and technological waters with a high content of BOD5, COD, fats and suspended substances. It is especially suitable for waste water from food industry enterprises, and technological water from the petrochemical, paper and textile industries. Advantageously, the flotation device is used as the first stage before sand filtration at water treatment plants and for very fine treatment of technological waters. It is also used for thickening sludge.

CIRCULAR FLOTATOR

Area use

The rotary SUPRAFLOT LC flotation device is used for cleaning waste and technological waters with a high content of BOD5, COD, fats and suspended substances. It is particularly suitable for wastewater from meat processing plants, rendering plants, starch plants, poultry plants, canneries and technological waters of the petrochemical, paper and textile industries. Advantageously, the flotation device is used as the first stage before sand filtration at water treatment plants and for the fine treatment of technological waters. It is also used for thickening sludge.

SPECIAL DROP NET

Area use

Gravitational machine-wiped sieve type GSS is used to capture floating and water-borne impurities. It is suitable for use in waste water treatment plants, where they are installed in the entrance facility of mechanical pre-treatment, for water plants, pumping stations, irrigation, wood, paper and food industries, power plants and heating plants.

CONTAINERS WATER TREATMENT PLANTS

Area use

It serves to ensure the supply of drinking water according to given standards from rivers, lakes, wells, etc. It can be used for the production of drinking water from sea and brackish water.

ATMOSPHERIC FILTER

Area use

MBF micro-mesh drum filters are intended for filtering technological waters and for removing suspended substances from municipal and industrial wastewater. They are installed in operations where it is necessary to filter water that does not flow through a pressure pipe, but through a channel or pipe without excess pressure (water treatment plants, wastewater treatment plants, technological operations).

SAND FILTER

Area use

Closed pressure sand filters type PFZ are intended for removing undissolved impurities contained in water. They are used for water filtration in drinking, service and operational water treatment plants.

PRESSURE FILTER

Area use

FILTROMAX TMF pressure microfilters are designed to remove mechanical impurities from water transported in pipelines under pressure. They are suitable for filtration of cooling water of compressor plants, condensers of power plants, water of paper mills, pre-filtration before sand filters.

THICKENING TANK S ROPE DRIVE

Area use

Thickening tanks with cable drive type ZN-L are intended for thickening sludge, but they can also be used as homogenizing tanks after modification.

THICKENING TANK SE CENTRAL DRIVE

Area use

Thickening tanks with a central drive type ZN S are intended for thickening sludge, but they can also be used as homogenization tanks after modification.